| Oġġetti | Kapaċità |
| klassifikazzjoni tal-bord | Bażi tal-Aluminju, Ram Bażi, Bażi tal-ħadid, bażi taċ-ċeramika miksija bir-ram, Bord Bade Magħqud |
| materjal | Domestiku Aluminju, ram domestiku, aluminju importat, ram importat |
| trattament tal-wiċċ | HASL/ENIG/OSP/fidda |
| kont tas-saff | bord stampat fuq naħa waħda/bord stampat fuq naħa doppja |
| maxi.board Daqs | 1200mm * 480mm |
| min.board Daqs | 5mm * 5mm |
| wisa 'traċċa/apsce | 0.1mm/0.1mm |
| medd u twist | <=0.5% (ħxuna: 1.6mm, Bord Daqs: 300mm * 300mm) |
| ħxuna tal-bord | 0.5mm-5.0mm |
| ħxuna iqarqu tar-ram | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| Tolleranza tal-grad V-CUT | CNC routing:±0.1mm;punch:±0.1mm |
| Reġistrazzjoni V-CUT | ± 0.1mm |
| Ħxuna tar-ram tal-ħajt tat-toqba | 20um-35um |
| Min reġistrazzjoni tal-pożizzjoni tat-toqba (campare b'dejta CAD) | ± 3mil (± 0.076mm) |
| Min.titqib toqba | 1.0mm taħt, 1.0mm (ħxuna tal-Bord taħt 1.0mm, 1.0mm) |
| Min.punching slot kwadru | 1.0mm taħt, 1.0mm * 1.0mm (Ħxuna tal-bord taħt 1.0mm, 1.0mm * 1.0mm) |
| Re[istrazzjoni ta' circuit stampat | ± 0.076mm |
| Dijametru tat-toqba Min.drill | 0.6mm |
ħxuna tat-trattament tal-wiċċ | deheb tal-kisi: Ni 4um-6um, Au0.1um-0.5um ENIG:Ni 5um-6um,Au:0.0254um-0.127um fidda: Ag3um-8um HASL: 40um-100um |
| V-CUTdegree tolleranza | ± 5 (Grad) |
| Bord V-CUT ħxuna | 0.6mm-4.0mm |
| Min.Lefend wisa' | 0.15mm |
| Min.Ftuħ tal-maskra tal-istann | 0.35mm |